Outdoor Weatherproof Waterproof Dustproof Compact Prefabricated Intelligent Safe High Efficiency Electrical Power Distribution Substation

• Customization: Available
• Type: Power
• Structure: 1
• Certification: ISO9001:2000, VDE, CCC, 1
• Form: All- packaged Type
• Operation Voltage: High Voltage
• Size: 1 Uint
• Application Range: High-rise Buildings
• Shell Material: Stainless Steel
• Shell Protection Grade: IP56
• Brand: Cnkeeya
• Transport Package: Wooden Case
• Specification: 800*1500*2300mm
• Trademark: CNKEEYA
• Origin: China
• HS Code: 8537209000
• Package Size: 1600.00cm * 800.00cm * 2300.00cm
• Package Gross Weight: 1000.000kg

Product Description

Product Introduction

This product has the characteristics of small size, easy installation and maintenance,low noise, low loss, anti-theft, full protection, and strong overload capacity. It is suitable for new residential areas, green belts, parks, station hotels, construction sites, airports and other places,ZGS13-12/0.4 series prefabricated substations (American style), suitable for 10kV ring network power supply, dual power supply or terminal power supply system, as substation,metering,compensation control and protection devices. This product complies with the following standards: GB17467 "High Voltage and Low Voltage Prefabricated Substation" DL/T537 "High Voltage and Low Voltage Prefabricated Box Substation Selection Guide".

This diagram shows the layout of an electrical assembly. At the top, a Heat sink is positioned above the "Transformer location". Below this transformer area, a rectangular compartment is divided into two sections: the High pressure chamber on the left and the Feeder room on the right. In the lower - right corner, there is a Cable fall with dimensions marked as 700×600.

 

Underground Cable Trench

1. Dimensions & Structure:
   • The trench has a width of 1400 and a depth that "depends on cable layout, generally 1500" (as noted in the diagram).
   • The side walls are built with red brick walls, and the base is reinforced with 300 - thick reinforced concrete for structural stability.
2. Internal Components:
   • A ground bar (25×5 flat bar) is installed within the trench, crucial for electrical grounding.
   • A cable fixing bracket (made of 50×50 angle steel) provides support for cable installation.
   • Cable holes are cut into the side walls, allowing cables to enter/exit the trench.

 

Serial number	Project	Unit	parameter
1	Rated voltage	kV	10/0.4(high pressure/low pressure)
2	Maximum working voltage	kV	12(high pressure side)
3	Rated frequency	Hz	50
4	Rated Capacity	KVA	50-800
5	1 minute power frequency withstand voltage	k	35
6	Lightning impulse voltage	kV	75
7	cooling method		Oil-immersed self-cooling
8	High voltage backup fuse breaking current	kA	50
9	Plug-in fuse breaking current	kA	25
10	ambient temperature	ºC	-35~+40
11	Coil allowable temperature rise	ºC	65
12	No-load voltage regulation		±5%or±2×2.5%
13	voice level	db	50
14	Protection class		IP43

Main Product

Company Profile

Focus on transmission and distribution and control equipment manufacturing ZheJiang Hanya Electric Appliance Co., Ltd, founded in 2009, is a comprehensive modern science and technology enterprise integrating power equipment resource development, manufacturing,domestic electrical equipment sales and import and export power equipment agency.Providing perfect power supply system for customers is CNKEEYA's mission!
The company is committed to building a high-tech enterprise integrating industry and trade.The group mainly develops and produces: high and low voltage complete sets of equipment, box type substation, power transformer, box type switching station, cable branch box, stainless steel distribution box and other transmission and distribution products, which can meet the needs of customers in all walks of life. CNKEEYA has a registered capital of 100 million yuan and has passed three certifications of quality management, environmental management and occupational health and safety management system. We can provide reasonable and perfect equipment pre-sale,sale and after-sales service with exquisite technology for a long time.CNKEEYA attaches great importance to scientific development and the construction of   high-quality talent team. At the same time, the company has strictly implemented various development plans in recent years, laying the foundation for the company's subsequent leapfrog development! All kinds of products produced by the company have achieved very good test results in the quality supervision, inspection and testing in Sichuan,
Chongqing, Shaanxi, Yunnan,Tianjin, Hebei and other places, and have been fully affirmed and trusted by the majority of customers in the power industry.

Our factory

Our certificate

Packing and shipping

FAQ

1.Are you a manufacturer?
If you have a factory, please tell me your address.Yes, we are a manufacturer. Our factory is located at No. 68,Wei No.19 Road, Yueqing Economic Development Zone, Yueqing City, Wenzhou City, Zhejiang Province,China.About 30 minutes from Wenzhou International Airport, about 1 hour from Wenzhou Station and Wenzhou Sout Station about 40 minutes from Wenzhou North Station, Yueqing Station, and Yueqing East Station.The nearest international seaport to us is Ningbo sea port or Shanghai Sea port.
2.Please tell me the ordering process.
You should supply us the detailed technical specifications or SLD(single line diagram) or relative
drawings firstly via email ,WeChat,WhatsApp,telephone.etc.You can contact any of our sales
persons in any time for quotation & further communication.Our sales personnel's information can
be found in the contact me section of the website.
3.Do you accept OEM & ODM ?
Yes.
4.Please tell me your payment terms.
We accept T/T. Generally, it is100% TT. When the value of the goods is large, the customer pays
30% in advance and 70% after confirmation by the customer before shipment
5.Where is your main market? How many percentage for your international business in your annual
sales?
Our main markets are Southeast Asia, Central Asia, Eastern Europe, Eurasia, North America,
Africa, and the Middle East.We only do exports and international business.
6.What is your guarantee period ?
Usually ,our quality guarantee period is 12 monthes. We have certificates ISO9001,1S014001,1S045001,IEC,etc.For our equipments,we use China or world top brand parts and production & testing strictly complies with international standards, like IEC, ANSI etc.
7.If we want to visit your factory, can you book a good hotel near to your factory and pick up us from airport or train station?
Sure, no problem.